IBM 8671 - Eserver xSeries 235, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 37 / 222

High-performance Ethernet modes
Your Ethernet controller supports optional modes, such as teaming, priority packets,
load balancing, fault tolerance, and virtual LANs, which provide higher performance,
security, and throughput for your server. These modes apply to the integrated
Ethernet controller and to the controllers on supported Ethernet adapters.
Ethernet port connector
The following illustration shows the pin-number assignments for the RJ-45
connector. These assignments apply to both 10BASE-T and 100/1000BASE-TX
devices.
8
1
Updating the integrated system management firmware
To update the integrated system management (ISM) firmware for the integrated
system management processor (ISMP), download the Integrated System
Management Firmware Update Utility program for your server from the IBM Support
Web site at http://www.ibm.com/pc/support/. Then run the Integrated System
Management Firmware Update Utility program to create a diskette to use to update
the ISM firmware. This diskette updates the ISM firmware only and does not affect
any device drivers.
Complete the following steps to update the ISM firmware:
1. Turn off your server.
2. Insert the diskette into the diskette drive.
3. Turn on your server. If your server does not start from the diskette drive, use the
Configuration/Setup Utility program to configure the diskette drive as a startup
device. See “Using the Configuration/Setup Utility program” on page 15. Then,
start again at step 1
4. From the main menu, select Update System Management Firmware and
press Enter.
5. Follow the on-screen instructions to complete the update.
If there is an error in updating the ISM firmware, try installing it again.
Chapter 2. Configuration
27