IBM 8671 - Eserver xSeries 235, Руководство по техническому обслуживанию и устранению неисправностей

Страница: 117 / 222

1 2
Keyboard
Mouse
Parallel
Serial
RS-485
(ASM interconnect)
USB 2
USB 1
Video
Ethernet
External SCSI
knockout
Optional
external
serial
knockout
Keyboard cabling
There is one keyboard port on the back of the server. Connect a keyboard to this
port.
Pointing device cabling
There is one pointing device port on the back of the server. Connect a pointing
device to this port.
Parallel port cabling
There is one parallel port on the back of the server. You can connect a parallel
device to this port.
Serial cabling
Your server has one standard serial port on the back of the server and one optional
serial port (shipped with the server). You can connect a serial devices to these
ports.
Advanced System Management Interconnect cabling
There are two Advanced System Management (ASM) Interconnect ports on the
back of the server. Use these ports to connect the server to a Remote Supervisor
Adapter in a remote server. The ports support full asynchronous RS-485
communication through a daisy-chain cable in half-duplex mode. Both ports have
automatic termination, and either port can be used if your server is at the beginning
or end of an RS-485 network.
Notes:
1. Do not confuse the two ASM Interconnect ports that are next to the video port
with the Gigabit Ethernet port.
2. If you install an optional Remote Supervisor Adapter in your server, use the
RS-485 ports on the Remote Supervisor Adapter and not the integrated RS-485
ports on the back of your server.
Chapter 4. Customer replaceable units
107