IBM 8237, Инструкция по установке и эксплуатации

Страница: 97 / 166

4-6
8237 Hub Installation and Planning Guide
Sample 3
The following example is typical of the display when you power ON a Model 003
advanced management hub. You can scroll up and down in this display.
IBM 8237 Agent EPROM V1.00 1997/06/30
Copyright(C) 1997, IBM Corp.
Current hub segment is 1
Console speed is 9600
Performing self-test, please wait....
<Press Ctrl+L to enter Download menu>
DRAM test..................PASS.
EPROM test.................PASS.
NIC test...................PASS.
REPEATER test..............PASS.
FLASHROM test..............PASS.
FEM test...................Not Detected.
RMON Daughter Board test...PASS.
RMON Daughter Board information:
POST flag : 0000
EPROM : PASS.
FLASHROM : PASS.
NIC : PASS.
DRAM size : 8192KB
ROM version : 1.00
ROM date : 1997/06/30
FW version : 1.00
FW date : 1997/06/30
HW version : 0
System recognized as Model 003.
POST flag is 1000.
MAC Address is 00-60-94-E2-00-5E
End of POST.
Entering the system:
Boot option : normal
Figure 4-4. Example Self-Test Results for Model 003
The replacement actions for failures of DRAM test, EPROM test, REPEATER test,
FLASHROM test, and FEM test are the same as those indicated for the Model 002.
If any of the RMON Daughter Board EPROM test, FLASHROM test, or NIC test
indicates FAIL, replace the RMON Daughter Board. Replacement procedures are
detailed in “Installation, Removal, and Replacement Procedures” on page 4-8.
If there is no SIMM installed and DRAM size shows less than 4096 KB, the on-
board DRAM is defective and the RMON Daughter Board should be replaced. If
there is a SIMM installed and DRAM size shows less than the sum of 4096 KB plus
the size of the SIMM capacity, remove the SIMM and retest by repowering ON the
hub. If the results of the retest show DRAM size is 4096 KB, replace the SIMM. If
DRAM size now shows less than 4096 KB, replace the RMON Daughter Board.