IBM 8237, Инструкция по установке и эксплуатации

Страница: 16 / 166


Copyright IBM Corp. 1997
xv
About This Manual
This manual describes the features of the IBM 8237 Stackable Ethernet Hub
10BASE-T (8237) and explains how to plan for 8237s in your new or existing
network, how to install 8237s, and how to administer 8237s.
Who Should Read This Manual
If you are a network planner, a hardware installer, a network administrator, or a
service engineer, this manual will help you in your work with 8237s.
How This Manual is Organized
This manual contains the following sections:
•
Chapter 1, "Introduction and Planning"
Describes the features of the 8237 and provides information you will need to
integrate 8237s into your new or existing network.
•
Chapter 2, "Installing the 8237"
Provides step-by-step instructions for installing the 8237 and its features.
•
Chapter 3, "8237 Administration"
Helps you determine which administrative actions are available to your 8237
installation, and then gives instructions for performing the actions.
•
Chapter 4, "Troubleshooting, Installation, and Replacement Procedures"
Gives the procedure for hot-swapping 8237s, provides step-by-step instructions
on installing all customer-replaceable parts, and lists the available replacement
parts. This chapter also gives steps for troubleshooting and for preparing to
make a call to IBM Service.
•
Appendix A, "Cable Pinout Diagrams"
Provides pinout diagrams for the cables and connectors that the 8237 accepts.
•
Appendix B, "The IBM 8237 Management Information Base"
Lists the IBM 8237 private MIB.
•
Appendix C, "Product Warranty and Notices"
Provides emissions notices, a list of trademarks, and a statement of warranty.
•
Glossary and Index
The Glossary gives definitions of the acronyms and key terms used in this
manual, and the Index helps you to find the information you are looking for.