IBM 8237, Инструкция по установке и эксплуатации

Страница: 124 / 166

Appendix B. The IBM 8237 Management Information Base
B-7
ipAutoDiscoveryInterval OBJECT-TYPE
SYNTAX INTEGER (1..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION "The time interval in minutes for the SNMP-
managed device to send the auto-discovery
trap."
::= { ipAutoDiscovery 2 }
ipAutoDiscoveryWatchDogInterval OBJECT-TYPE
SYNTAX INTEGER (1..24)
ACCESS read-write
STATUS mandatory
DESCRIPTION "The time interval in hours for the SNMP-managed
device to monitor for loss of contact with the
management station."
::= { ipAutoDiscovery 3 }
--
-- IPX auto-discovery Group.
-- The IPX auto-discovery group is accomplished by the IPX
-- SAP broadcasting. The following objects define the IPX
-- SAP broadcasting parameters.
--
ipxAutoDiscoveryStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Setting this object to enabled(1) enables the
IPX SAP broadcasting."
::= { ipxAutoDiscovery 1 }
ipxAutoDiscoveryInterval OBJECT-TYPE
SYNTAX INTEGER (1..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION "The time interval in minutes for the SNMP-
managed device to broadcast the IPX SAP
response frame."
::= { ipxAutoDiscovery 2 }
--
-- Stack information group; this group is classified into four
-- groups:the basic group, the monitor group, the backup group, and
-- the security group.
--
basicInfo OBJECT IDENTIFIER ::= { stackInfo 1 }
monitorInfo OBJECT IDENTIFIER ::= { stackInfo 2 }
backupPortInfo OBJECT IDENTIFIER ::= { stackInfo 3 }
securityInfo OBJECT IDENTIFIER ::= { stackInfo 4 }
--
-- Basic Stack Object
--
--
--
basicStack OBJECT IDENTIFIER ::= { basicInfo 1 }