manualshive.com logo in svg

IBM 8237, Инструкция по установке и эксплуатации

Поделиться
Скачать
IBM 8237 Скачать руководство пользователя страница 73

3-32

 

8237 Hub Installation and Planning Guide

  User Passwords

All Model 002s and Model 003s are shipped without a preset password.

Selecting User Passwords on the Main Menu causes the panel illustrated in Figure
3-25 to be displayed.

                           User Passwords

                       Return to Previous Panel

               User Type    User Name        Password

                Admin :   admin
                Guest :   guest

Use arrow keys to move. <Enter> to confirm

<Ctrl+T> to return to Main Menu

Figure 3-25.  User Passwords Panel

Return to Previous Panel

Return to the Main Menu panel.

User Type

The type of access for which the user name and password are being set.
The Admin user type has read and write authority, and persons
accessing the system using the user name and password assigned to
this user type will be able to modify the system configuration.  The Guest
user type has only read authority and cannot modify the system
configuration.

User Name

The user name that is to be entered when connecting to the 8237.  The
default user name for Admin is admin, and the default for Guest is guest.

Password

The password that is to be entered when connecting to the 8237.  There
is no default password for Admin.

Содержание 8237







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды