manualshive.com logo in svg

IBM 8237, Инструкция по установке и эксплуатации

Поделиться
Скачать
IBM 8237 Скачать руководство пользователя страница 68

Chapter 3.   8237 Administration     

 

3-27

  Port Security Control

Selecting Port Security Control on the Main Menu causes the panel illustrated in
Figure 3-20 to be displayed.  This panel defines the operational modes for both port
intrusion and eavesdropping.

                 Port Security Control: Hub Selection Menu

                         Return to Previous Panel

                 Select the port group to get configuration
                     or change address assignment mode

                  Hub ID |          Port ID       |  Mode
                 ------------------------------------------
                    1    |  1 thru 8   9 thru 16  | MANUAL
                    2    |  1 thru 8   9 thru 16  | MANUAL
                    3    |  1 thru 8   9 thru 16  | MANUAL
                    4    |  1 thru 8   9 thru 16  | MANUAL
                    5    |  1 thru 8   9 thru 16  | MANUAL
                    6    |  1 thru 8   9 thru 16  | MANUAL
                    7    |  1 thru 8   9 thru 16  | MANUAL
                    8    |  1 thru 8   9 thru 16  | MANUAL
                    8    |  1 thru 8   9 thru 16  | MANUAL
                   10    |  1 thru 8   9 thru 16  | MANUAL

Use arrow keys to move. <Enter> to confirm

<Ctrl+T> to return to Main Menu

Figure 3-20.  Port Security Control: Hub Selection Menu Panel

Return to Previous Panel

Return to the Main Menu panel.

Mode

This is a selection field.  Possible values are MANUAL and AUTO.  The
default setting is MANUAL configuration.

Selecting AUTO in the Mode field will cause the authorized address for each port of
the hub to be automatically learned.  That is, the source address of the most
recently received frame (the Last Source Address) will automatically become the
authorized address.  Selecting MANUAL requires the authorized address for each
port of a hub to be manually configured.  The authorized address is used for
Intrusion Security protection.  Eavesdropping prevention uses only the Last Source
Address.  Note that if AUTO is selected for a hub and some of its ports have had an
authorized address manually entered, the Mode field will display MIXED.

When you have moved the highlighting to the line containing the hub ID of the hub
whose ports you want to configure, use the Right and Left arrow keys to toggle
between selection of ports 1 through 8, or 9 through 16, for configuration.

Selecting 1-8 on the Port Security Control: Hub Selection panel causes the panel
illustrated in Figure 3-21 on page 3-28 to be displayed.  Selecting 9-16 causes the
panel illustrated in Figure 3-22 on page 3-28 to be displayed.

Содержание 8237







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды