IBM 8237, Инструкция по установке и эксплуатации

Страница: 120 / 166

Appendix B. The IBM 8237 Management Information Base
B-3
STATUS mandatory
DESCRIPTION "Access mode of the community. A read-only
community cannot be used to issue set
commands. If the SNMP access uses a community
which communityAccessMode is read-only to
access the community table, only the community
used is accessible. All other community
entries are invalid and their communityString
values are shown as null strings."
::= { communityEntry 3 }
communityStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Administration status of this community. SNMP
requests will be accepted when the community
string matches and the community status is
valid."
::= { communityEntry 4 }
--
-- Trap manager group
--
-- The trap manager group is used to define the nodes which
-- can receive the trap messages sent by the agent.
--
trapManagerMgt OBJECT IDENTIFIER ::= { systemInfo 2 }
ipTrapManagerMgt OBJECT IDENTIFIER ::= { trapManagerMgt 1 }
ipxTrapManagerMgt OBJECT IDENTIFIER ::= { trapManagerMgt 2 }
--
-- IP trap manager group
--
ipTrapManagerTableSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION "Size of the IP trap manager table."
::= { ipTrapManagerMgt 1 }
ipTrapManagerTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpTrapManagerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "IP trap manager table."
::= { ipTrapManagerMgt 2 }
ipTrapManagerEntry OBJECT-TYPE
SYNTAX IpTrapManagerEntry
ACCESS not-accessible
STATUS mandatory
INDEX { ipTrapManagerIndex }
::= { ipTrapManagerTable 1 }
IpTrapManagerEntry ::= SEQUENCE
{
ipTrapManagerIndex
INTEGER,
ipTrapManagerCommunityIndex
INTEGER,