IBM 7133 Series, Руководство по обслуживанию

Страница: 97 / 230

Step 5
(from step 3)
Are you at this MAP because you have found an hdisk that has no associated
pdisk?
NO Go to step 6.
YES 1. Give the
cfgmgr
command.
2. Run the Configuration Verification service aid again.
3. If the problem remains, a software error has probably occurred. Call your
support center for assistance.
Step 6
(from step 5)
Are you at this MAP because you have found a pdisk that has no associated hdisk?
NO Go to step 8 on page 2-2010-4.
YES 1. Run diagnostics in System Verification mode to the pdisk.
2. Go to step 7.
Step 7
(from step 6)
Do you have an SRN?
NO The problem might have occurred because the formatting of the disk is not
compatible with the using system. (Probably, the disk has been formatted on a
different type of using system.)
1. Format the pdisk.
2. Give the
cfgmgr
command.
3. Run the Configuration Verification service aid again.
4. If the problem remains, a software error has probably occurred. Call your
support center for assistance.
YES 1. Go to “Service Request Numbers (SRNs)” on page 2-2, and follow the
actions given.
2. If the problem remains, a software error has probably occurred. Call your
support center for assistance.
Chapter 2. Problem Determination Procedures
2-2010-3