IBM 7133 Series, Руководство по обслуживанию

Страница: 207 / 230

Support Rails
| Note: This procedure applies only to Models 010 and 020.
1
To remove the support rails, remove the screws
1
, then remove the rails.
2
If you need to reinstall the support rails (for example, because you are relocating the
7133), or you need to install replacement rails, go to step 3.
3
The 7133 is four EIA 1 units high. Using the preinstallation planning information, or
other information supplied by the customer, determine where you are going to locate
the 7133 in the rack.
4
Refer to the EIA markings on the rack and decide where you are going to install the
support rails. If appropriate, allow for possible future installation of other
subsystems.
1 Electronics Industries Association.
Chapter 3. Removal and Replacement Procedures
3-61