IBM 620410U - IntelliStation E - Pro 6204, Руководство пользователя

Страница: 70 / 166

6. Insert the DIMM into the connector. Firmly press the DIMM straight down into
the connector by applying pressure on both ends of the DIMM simultaneously.
The retaining clips snap into the locked position when the DIMM is firmly
seated in the connector.
DIMM connector 1
DIMM connector 2
DIMM connector 3
7. If a gap exists between the DIMM and the retaining clips, the DIMM has not
been correctly installed. Open the retaining clips, remove the DIMM, then
reinsert it.
8. If you have other options to install or remove, do so now.
9. Replace the frame support bracket.
10. Replace the cover. See “Replacing the cover” on page 55.
11. Reconnect the external cables and power cords. Turn on the attached devices,
and turn on the computer.
Installing a security U-bolt
To help prevent theft, you can add a security U-bolt and cable to your computer.
Do the following to install the U-bolt:
1. Review the safety precautions listed in “Safety information” on page vii.
2. Turn off the computer and all attached devices. Disconnect all external cables
and power cords; then remove the cover. See “Removing the cover” on page 43
or “Removing the side cover” on page 60 for details.
3. Use a screwdriver to remove the two metal knockouts.
4. Insert the U-bolt through the rear panel; then attach and tighten the nuts.
54
IBM IntelliStation E Pro Types 6204 and 6214: User’s Guide