IBM 5400-006, Инструкция по настройке

Страница: 190 / 210

Control Codes
53.Set Vertical Tab: ESX 19 n1 n2 vt1 vt2 ... vtn (X ' 1B 7E 19 n1 n2 vt1 vt2 ...
vtn ' )
Sets the vertical tab. The n1 and n2 indicate the number of vertical
tabs, and the vt1, vt2 ... vtn (one byte each) specifies the tab positions
in the single character unit.
The tab position is set at the current line pitch. The maximum number
of tabs that can be set is 64. Anything above 64 is ignored.
In the case of n1n2=0 vertical tabs are cleared.
54.Set Left and Right Margins: ESX 1A 00 02 lm rm (X ' 1B 7E 1A 00 02 lm
rm ' )
The left margin and the right margin are one byte each. lm specifies the
left margin and rm specifies the right margin from the far left of the
printed area, by the number of single byte characters.
If the distance between the left margin and the right margin is less than
12.7 mm (0.5 inch/90 dot row), the right margin exceeds the right end
(8, 13.2, or 13.6 inches), or the left margin or right margin is specified as
zero, the specification is ignored.
55.Set Perforation Skip: ESX 1B 00 01 n (X ' 1B 7E 1B 00 01 n ' )
This control code activates or cancels the perforation skip function. The
function moves the printing position from the last line of the page to the
first line (TOF) of the next page by a specified number n (one byte
hexadecimal number) of lines.
The skip distance is set in the current line pitch. If n=0 or the receiving
Set Page Length command or the Initialization command, perforation
skip returns to the default setting.
Setting the perforation skip in the default setting function, the skip dis-
tance is set to 12.7 mm (0.5 inch) or 25.4 mm (1 inch).
Note: If the skip distance specified by this control code is less than the
length between the perforation and the TOF, the printer prints on
the perforation.
C-18
IBM 5400-006 Printer: Setup Instruction and Operator's Guide
All manuals and user guides at all-guides.com