IBM 5400-006, Инструкция по настройке

Страница: 160 / 210

Label Forms
A.5 Label Forms
When using the label forms (tack paper), pay attention to the following:
Ÿ
Materials, ream, and thickness
Notes:
1. The ream of the label forms (label + ad board) must be 135 kg or
less.
2. The thickness of the label forms (label + ad board) must be 0.2
mm or less.
Ÿ
Type of label forms:
There are two types of label forms: half-cut type and modeled type. Ordinarily,
use the half-cut type.
For the modeled type, the label is peeled in the machine and form jam results
frequently.
Do not use the modeled type.
Ÿ
Pretest
Test enough in advance and check that the following problems do not occur:
– The label is not peeled. (This causes form jam.)
– Glue does not stick out extremely. (This might cause machine trouble.)
– No folding error is detected in the machine.
Ÿ
Storage Place
Since label forms reduce and transform as the temperature and humidity
change, labels peel. Labels must be stored in a dark and cool place (temper-
ature 20°C, relative humidity 40 to 60%) where the temperature and humidity
are stable.
Label forms must be kept a vinyl package after use.
Label Ream 45
∼
55 kg (Note 1)
Materials High Quality Form
Thickness 0.08 mm or less (Note 2)
Adhesive Adhesiveness 350 g/25 mm or more
Ball Tack No.3 or more
Fit to the label material. Do not blot or let stick out.
Board Ream 55
∼
80 kg (Note 1)
Material Glassine Paper
Thickness 0.10 mm or more (Note 2)
A-6
IBM 5400-006 Printer: Setup Instruction and Operator's Guide
All manuals and user guides at all-guides.com