IBM 5400-006, Инструкция по настройке

Страница: 188 / 210

Control Codes
50.Set/Cancel Overstrike Mode: ESX 13 n1 n2 c1 c2 c3 (c4) (X ' 1B 7E 13 n1
n2 c1 c2 c3 (c4) ' )
Specifies the single or double byte character to be overstruck. The
character specified is overstruck after this. The previously specified
overstrike ends when the cancellation specified (set Bit0 of c1 to 0) or
the overstrike mode is newly specified.
To specify n1, n2, c1, c2, c3, or (c4), do the following:
Single Byte Character
n1=X
'
00
'
, n2=X
'
03
'
c1: Overstrike Flag
Bit 0
1: Set Overstrike Mode
0: Cancel Overstrike Mode
Bit 1
1: Does not overstrike spaces
0: Overstrikes spaces
Bit 2
∼
7
Not defined. These bits are ignored.
c2: Undefined byte. This byte is ignored.
c3: Specify the DOS internal 1 byte code.
Note: Do not specify c4.
Double Byte Character
n1=X
'
00
'
, n2=X
'
04
'
c1: Same as the single byte character
c2: Same as the single byte character
c3: Specify the upper byte of the DOS internal 2 byte code
c4: Specify the upper byte of the DOS internal 2 byte code
Note: Overstrike cancellation is as follows:
X
'
1B 7E 13 00 01 00
'
The overstrike character is changes accordingly, as font style, con-
densed character, or superscript/subscript are made.
C-16
IBM 5400-006 Printer: Setup Instruction and Operator's Guide
All manuals and user guides at all-guides.com