IBM 5400-006 Скачать руководство пользователя

Страница: 45 / 210

Names and Functions

2.1.5 Operator Panel

The operator panel has 12 switches, 9 indicator lamps, and an LCD. The indicator
lamps are indicated by

The functions of the switches, indicator lamps, and the LCD on the operator panel
are as follows:

Switches

Switch Name

Function

Start

Puts the IBM 5400-006 printer in ready status. The Start
lamp lights and the printer is ready to print.

This switch functions only when the IBM 5400-006 printer is
in the not ready status and no errors are detected.

Form Feed

Feeds the form to the first line position of the next page.

Note: When connected to an AS/400 system, the length of

the form must be set by and application program. If
this is not set, a 1/6 inch length form is fed.

Line Feed

Feeds the form one line at a time. To continuously feed the
form, press continually.

Note: When connected to an AS/400 system, the standard

line spacing is 6 LPI (4.2 mm). However, this can be
changed by an application program.

Clear Print

If printable data remains in the print buffer and printing is ter-
minated or stops, the remaining data can be printed by
pressing this.

If there is no data to be printed, No Data is displayed on the
LCD.

Also used to print only one line when preprinting or adjusting
the printing position.

Chapter 2. Operation

2-5

All manuals and user guides at all-guides.com

Содержание 5400-006



















































































































































































































Результаты поиска

Содержание 5400-006

Отзывы:

Похожие инструкции для 5400-006

Бренды по названию

Популярные бренды

IBM 5400-006, Инструкция по настройке

Результаты поиска

Содержание 5400-006

Отзывы:

Похожие инструкции для 5400-006

Бренды по названию

Популярные бренды