IBM 4247 Model 003, Руководство пользователя

Страница: 189 / 392

Chapter 14. Send Buffer Reprint Code (Coax)
You can set Send Buffer Reprint Code to:
v
Yes
v
No (Default)
Selecting Yes causes the printer to reprint all of the data stored in the
communications buffer after Start is pressed. A message is displayed while the
function is processing. The function is not accepted if:
v
Print operation is active
v
If the printer is in the IPDS mode
v
If Early Print Complete is active
v
OR
v
If Intervention Required status has been sent to the host and it is an Operator
Initiated Local Copy (OILC) print.
In these cases, the
009 INVALID KEYPRESS
message will display after you exit from
the Configuration Menu.
To change or check the buffer reprint setting, follow these steps:
1. Press Menu.
2.
Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Send Buffer Reprint Code
3. Press Enter to display the current value.
4. Press Scroll
↑
or Scroll
↓
until the desired value for send buffer reprint code is
displayed.
5. Press Enter.
An asterisk (*) will be displayed in front of the selected value.
6. Press Start or Return to exit the Menu. See “Exiting the Configuration Menu”
on page 55.
© Copyright IBM Corp. 2002
179