IBM 3745 Series, Руководство по установке и обслуживанию

Страница: 131 / 270

IBM PC Enhanced Diagnostic Error Codes
Refer to the following Diagnostic Error Codes when using the IBM PC Enhanced
Diagnostics test. See “Diagnostics Test Programs” on page 4-3 for information
about the IBM PC Enhanced Diagnostics program.
In the following index, “X” can represent any number.
Diagnostic Error Code FRU/Action
000-000-XXX
BIOS Test Passed 1. No action
000-002-XXX
BIOS Timeout 1. Flash the system
2. System board
000-024-XXX
BIOS Addressing test failure 1. Flash the system
2. System board
000-025-XXX
BIOS Checksum Value error 1. Flash the system
2. Boot block
3. System board
000-026-XXX
FLASH data error 1. Flash the system
2. Boot block
3. System board
000-027-XXX
BIOS Configuration/Setup error 1. Run Setup
2. Flash the system
3. Boot block
4. System board
000-034-XXX
BIOS Buffer Allocation failure 1. Reboot the system
2. Flash the system
3. Run memory test
4. System board
000-035-XXX
BIOS Reset Condition detected 1. Flash the system
2. System board
000-036-XXX
BIOS Register error 1. Flash the system
2. Boot block
3. System board
000-038-XXX
BIOS Extension failure 1. Flash the system
2. Adapter card
3. System board
000-039-XXX
BIOS DMI data error 1. Flash the system
2. System board
000-195-XXX
BIOS Test aborted by user 1. Information
2. Re-start the test, if need to
000-196-XXX
BIOS test halt, error threshold exceeded 1. Depress F3 to review the log file.
See
“Viewing the Test Log” on
page 4-8.
2. Re-start the test to reset the log file.
000-197-XXX
BIOS test warning 1. Make sure component that is called
out is enabled and/or connected
2. Re-run test
3. Component that is called out in
warning statement
4. Component under test
Chapter 4. Service Processor Diagnostics and Test Information
4-9