IBM 3745 Series, Руководство по установке и обслуживанию

Страница: 70 / 270

24. ____ Select the type of DCAF links that you are going to define and modify the
LU name according to the customer specifications:
Notes:
a. We recommend using four letters to identify the MOSS-E machine to DCAF
connections. These names should be unique in your network, refer to the
following worksheets:
¹
“For SNA-Attached Consoles” on page C-4
¹
“For APPN/HPR-Attached Consoles” on page C-4
¹
“For LAN-Attached Consoles” on page C-4
¹
“For Modem-Attached Consoles” on page C-4
b. To specify the destination address, refer to Figure 1-42 on page 1-45
and according to the NetView path definition, set this address as follows:
¹
If the alert path to NetView is not defined or thru SNA:
– The DCAF SNA can be set for path: 1, 2, or 3
– The DCAF APPN can be set for path: 3
¹
If the alert path to NetView is defined thru APPN:
– The DCAF SNA can be set for path: 1, 2, or 3 with a RSAP
different than the TIC3 RSAP (see Figure 1-35 on page 1-40)
– The DCAF APPN can be set for path: 3 with the same RSAP
define for the NetView link (see Figure 1-35 on page 1-40).
25. ____Then click on "Next>>", and go to step 28 on page 1-48.
Figure 1-43. DCAF Customization
1-46
3745-XXA 1-46 3746-9X0: 6563 SPIM