IBM 3745 Series, Руководство по установке и обслуживанию

Страница: 44 / 270

6. ____ Install the 8228 in a safe place near the service processor. If you
received a controller expansion, the 8228 is installed on the rear side of the
controller expansion using two screws (PN 1621232) and two captive nuts (PN
58G5766) see Figure 1-15 on page 1-20. Using label
.A/
(PN 0782966),
identify the 8228 as Service Processor Access Unit.
A
Figure 1-15. Installing the 8228 (Controller Expansion Rear side)
7. ____ Connect the 8228 to the Service Processor as follows:
Note: If you have a controller expansion, refer to Figure 1-17 on page 1-21, if
not refer to Figure 1-16 on page 1-21.
a. ____ Plug connector
.1/
of cable
.A/
to the service processor
b. ____ Using a sticker, identify the connector
.2/
as the "service processor
cable".
c. ____ Plug connector
.2/
to any plug of the 8228 from 1 to 8
1-20
3745-XXA 1-20 3746-9X0: 6563 SPIM