IBM 3745 Series, Руководство по установке и обслуживанию

Страница: 67 / 270

19. ____ To define a 3270 session:
a. ____ From the host code page pulldown menu, select your code page
according to the country
b. ____ The "LU local / NAU address" according to the value recorded on
the parameter worksheet "NCP Dump Transfer" (refer to “NCP Dump
Transfer” on page C-1).
c. ____ The "Long session/LU name" according to the value recorded on
the parameter worksheet "NCP Dump Transfer" (refer to “NCP Dump
Transfer” on page C-1).
Note: The number of sessions can me modified only in PE mode. In CE mode
only one session can be defined.
Figure 1-39. Token-Ring 3270 Session Customization
20. ____Then click on "Next>>", then go to step 21 on page 1-44 (if you selected
in step 10 on page 1-36 to customize a RETAIN link)
Notes
1. In the 3270 Session Customization screen, you have entered the:
a. LU local/NAU address
b. Long session/LU name
These parameters must be the same as the values recorded in the
switched major definition (refer to Figure 1-40 on page 1-44 for an
example of a switched major node definition).
In this example:
a. LU local/NAU address <===>
.03/
b. Long session/LU name <===>
.MOSSEEMU/
c. For the MOSSEEMU LU, you must use the logon mode table entry
.SNX32702/
to allow the file transfer.
2. Use the LU name to identify the session.
3. The LU local address must be equal to 03 or above (values 01 and 02
are used and reserved by the service processor product).
In the switched major node, add one LU statement for the 3270 session:
Chapter 1. Installing and Setting Up Your Service Processor
1-43