IBM 3745 Series, Руководство по установке и обслуживанию

Страница: 35 / 270

A
Figure 1-2. Installing Label on the Front Side of the Service Processor
4. ____ If you have a controller expansion, install the service processor kit PN
58G5698 (service drawer, brackets, and plates), go to Step 5. Otherwise go to
Step 17 on page 1-15.
5. ____ Open the front and rear doors of the controller expansion. Refer to
Figure F-3 on page F-4 and locate the positions to install the brackets for the
display and the service processor. Locate also the position to install the service
drawer.
6. ____ For the display and the service processor, install four brackets
.1/
(PN
58G5752) and secure using eight screws
.2/
(PN 2665527).
XX
XX
XX
1
2
Figure 1-3. Installing Brackets PN 58G5752
7. ____ On the brackets installed for the display and the service processor, install
plate
.4/
(PN 58G5755) using four screws
.3/
(PN 1621230)
Chapter 1. Installing and Setting Up Your Service Processor
1-11