IAI SCON-CB-F, Инструкция по эксплуатации

Страница: 135 / 450

2. Wiring
119
Motor Connector (MOT)
Encoder Connector (PG)
Model Remarks
Cable Side GIC2.5/4-STF-7.62
Controller Side GIC2.5/4-GF-7.62
Pin No. Signal Name Contents Applicable cable diameter
1 PE Protective ground line
2 U Motor drive phase U
3 V Motor drive phase V
4 W Motor drive phase W
Cable dedicated for IAI
actuators
Model Remarks
Cable Side 10126-3000VE
Controller Side 10226-6202JL
Pin No. Signal Name Contents Applicable cable diameter
1 A+
Phase A Diff Input
(Phase U+)
2 A-
Phase A Difference - Input
(Phase U-)
3 B+
Phase B Diff Input
(Phase V+)
4 B-
Phase B Difference - Input
(Phase V-)
5 Z+
Phase Z Diff Input
(Phase W+)
6 Z-
Phase Z Difference - Input
(Phase W-)
7 SRD+
Send/Receive Diff
(Pulse/Magnetic Pole
Chan)
8 SRD-
Send/Receive Difference -
(Pulse/Magnetic Pole
Changeover -)
9 Loadcell Communi
10 LC_SRD- Loadcell Communication -
11 NC Unconnected
12 E24V Sensor Power Output
13 0V 24V Power Supply GND
14 BAT+ Backup Battery Power Supply
15 BAT- Battery Ground
16 VCC Encoder Power
17 GND GND
18 LC_VCC Loadcell Power +
19 LC_GND Loadcell Power -
20 BKR-
Brake Release Output Signal -
(COM : Common to All Axes)
21 BKR+ Brake Release Output
22 NC Unconnected
23 RSV Sensor Input (Reserve)
24 OT Sensor Input (Over Travel)
25 CREEP Sensor Input (Creep sensor)
26 LS Sensor Input (limit switch)
Cable dedicated for IAI
encoders
2.5.3