Hytera TETRA PT580H F5 Скачать руководство пользователя страница 2

Страница: 2 / 33

Document Conventions

Owner’s Manual

Hytera is the trademark or registered trademark of Hytera Communications Co., Ltd. (the Company) in

PRC and/or other countries or areas. The Company retains the ownership of its trademarks and product

names. All other trademarks and/or product names that may be used in this manual are properties of

their respective owners.

Disclaimer

The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of

accuracy or reliability is given. All the specifications and designs are subject to change without notice

due to continuous technology development. No part of this manual may be copied, modified, translated,

or distributed in any manner without the express written permission of us.

We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or

completeness of the Third Party products and contents involved in this manual.

If you have any suggestions or would like to learn more details, please visit our website at:

http://www.hytera.com

Содержание TETRA PT580H F5


































Результаты поиска

Содержание TETRA PT580H F5

Отзывы:

Похожие инструкции для TETRA PT580H F5

Бренды по названию

Популярные бренды

Hytera TETRA PT580H F5, Руководство пользователя

Результаты поиска

Содержание TETRA PT580H F5

Отзывы:

Похожие инструкции для TETRA PT580H F5

Бренды по названию

Популярные бренды