Message
Owner’s Manual
Note:
If the message is sent as a flash message, the receiving party can preview all the content in a
predefined time period without any operation. Once the time period expires, the home screen will get
restored, with the icon
displaying on the status bar.
Viewing the User Message
When the icon
appears in the status bar, it indicates there is/are unread message(s). Do as follows
to view it:
z
In the prompt screen for an unread message, press the
Func/OK
key to enter the Inbox, and press
Func/OK
key again to read.
z
In the home screen, press the
Func/OK
key and navigate to “Message -> Inbox ”. Then you can
press
Func/OK
key to view the unread message.
9.2.2
DMO
Editing a User Message
Press the
Func/OK
key and navigate to “Message -> Create Msg -> User Msg”. Press
Func/OK
key
again to edit a user message.
Sending a User Message
After editing, press
Func/OK
to confirm. Then choose either to send to an individual or to a group, and
then input the target contact and press
Func/OK
key to send the message.
Viewing the User Message
Operate in the same way as that described in ”Viewing the User Message” in the above “TMO” section.