Owner’s Manual
Call Services
8. Call Services
8.1
TMO
8.1.1
Individual Call
In TMO, an individual call can be initiated either as a half-duplex call or full-duplex call, which can be
received without pressing any key (Direct Signaling) or by pressing the
Answer/Call
key or
PTT
(Hook
Signaling). Contact your dealer for such programming as well as more details.
Initiating an Individual Call
z
Via Menu
In the home screen, press
Func/OK
key to enter the “PhoneBook” or “Call Log” submenu, and select
a contact. Then press
PTT
to initiate a half-duplex call, or press
to initiate a full-duplex call.
z
Via Manual Dial
In the home screen, to initiate a half-duplex individual call, input the number you want to call through
the keypad, and then press
PTT
. To initiate a full-duplex individual call, input the number you want to
call through the keypad, and press
repeatedly to select the call type “Private No.”. Then press
to initiate a full-duplex call.
Note:
¾
Entry of individual numbers must comply with the SSI&TSI dialing rules. See “SSI&TSI Dialing
Rules” in “Appendix” for more details.
¾
Calls will end automatically if the predefined call timer expires.
Answering an Individual Call
z
Half-duplex Individual Call
¾
If it is an incoming call with Direct Signaling, there will be an alert tone to inform the called party
that a call is received.
¾
If it is an incoming call with Hook Signaling, the terminal sounds alert and vibrates to inform the
called party that there is an incoming call. And to receive the call, the
PTT
key or
Func/OK
key
should be pressed.
To take the talk rights during the call, there are two situations: 1) if you have no pre-emptive priority,
hold down
PTT
to talk after the talking party stops talking and releases its
PTT
; 2) if you have already
been programmed with pre-emptive priority, hold down
PTT
to talk at any time.
z
Full-duplex Individual Call