Call Services
Owner’s Manual
¾
If it is an incoming call with Direct Signaling, there will be an alert tone to inform the called party
that a call is received.
¾
If it is an incoming call with Hook Signaling, the terminal sounds alert and vibrates to inform the
called party that there is an incoming call. And to receive the call, the
PTT
,
Func/OK
key or
should be pressed.
After the call is established, both parties can talk at any time, with no need to use any key.
Hanging up/ Rejecting an Individual Call
When initiating the individual call, press the
Options/Back
key or
to terminate it.
In the presence of an incoming individual call, press the
Options/Back
key or
to reject it.
In the process of an individual call, any party can press
8.1.2
Group Call
Initiating a Group Call
In the home screen, you can initiate a group call to the default group by pressing
PTT
. To call other
groups, please do as follows:
Step 1
In the home screen, rotate the
Group Call Selector
knob to select a group. Please perform this
step as soon as the icon
appears; otherwise, you may fail to select.
Step 2
Press the
Func/Ok
key to confirm your selection.
Step 3
Press
PTT
to initiate a group call to this group.
Answering a Group Call
You can receive a group call without any operation. To take the talk rights during the call, there are two
situations: 1) if you have no pre-emptive priority, hold down
PTT
to talk after the talking party stops
talking and releases its
PTT
; 2) if you have already been programmed with pre-emptive priority, hold
down
PTT
to talk at any time.
Hanging up a Group Call
The calling party can press
to exit a group call. And for the called parties in a group call, only those
enabled with “Hang Up” feature (programmable by the dealer) can exit a group call.
8.1.3
Telephone Call
The telephone call is a full-duplex individual call with Hook signaling. To initiate the call, follow the steps
below.
