Owner’s Manual
Basic Operations
7. Basic Operations
7.1
Turning On/Off
To turn on the terminal, rotate the
Power On-Off/Volume Control
knob clockwise. Then the LED
indicator flashes green, and the terminal shows the power-up screen and sounds power-up alert. Upon
successful powering on, the terminal enters the home screen. In TMO, after being turned on, the
terminal will logon to the network. In DMO, the terminal will be ready for use after being turned on.
To turn off the terminal, rotate the
Power On-Off/Volume Control
knob counter-clockwise until a click is
heard.
7.2
Switching Operation Mode
This terminal can operate in either TMO or DMO. To switch the operation mode, press the
Options/Back
key in the home screen to enter the “Options” menu, and then select “TMO” or “DMO”.
7.3
Adjusting the Call Volume
Rotate the
Power On-Off/Volume Control
knob clockwise to increase the call volume, or
counter-clockwise to decrease the volume. After the adjustment, the terminal will save the settings and
return to the former screen automatically.
7.4
Inputting through Keypad
You can use the numeric keypad to enter user alias and number, edit messages, etc. The terminal
supports these input methods: English and Number. To switch the input method, press the
key
on the numeric keypad. In either input method, you can enter special characters and common
punctuations by pressing
, enter “*” by pressing
and enter a space by long pressing this key
. As for other language input methods (depending on your customization), operate accordingly.
7.5
Locking/Unlocking the Keypad
To enable the keypad lock, enter the Func menu by pressing the
Func/OK
key in the home screen, and
then go to “Settings -> KP Lock -> On”. After this feature is enabled, keypad will get locked automatically
when the preset time (preset by the dealer) expires. To unlock the keypad, press the
Func/OK
key and
then
.
