Hydrotec HydroDOS HD550G, Руководство по эксплуатации и обслуживанию, Страница: 60 / 103

I-60/103
Last change 04/2016 E-P – AL/TW/PW | Subject to technical modifications
Setting of figure parameters
A keyboard opens for parameters where you can freely enter value figures or texts if you tap on the
input screen.
In case of a letter keyboard you can choose the subsequent letters by pressing the corresponding key
several times.
Example: abc key
- pressing the abc key once: a appears
- pressing the abc key two times: b appears
- pressing the abc key three times: c appears
The input gets approved to be within the input limits only after confirming the entry with the
OK button.
If the value is within the input limits, then the keyboard will close.
If the value is instead beyond the input limits it will not be accepted, the input screen becomes reversed
and the keyboard remains open. Only after entering and confirming a valid value or by pressing the
ESC button the keyboard will closed.
4.4 Control setting
The parameters to be adjusted are subdivided in eight categories with submenus.
By pressing the red marked arrow key
you open the main menu.
➢
Kal (Calibration)
o
Reference Start calibration with a reference value
o
Zero point Calibration of zero point
o
Info Display of last 10 calibration results
VII. 12