Huvitz HRK-7000 Скачать руководство пользователя страница 75

Страница: 75 / 97

--------------------------------------------------------Auto Ref/Keratometer HRK-7000/7000A 75

9.4.

DISPLAY Mode

You can see the measured results(Max ten(10) units of data) stored in memory in this

mode. As pushing DISPLAY mode in the measurement mode, it changes to DISPLAY

Mode. It returns to the measurement mode as pushing EXIT button again.

NOTE

●

In case of K/R mode, the page changes as pushing REF button or KER button.

●

As pushing print button, the measured result stored in memory is to be printed out
through the built-in printer, and it is removed completely for the new measurement.

Measured Result of Refractometry

①

It indicates the latest measured result of max amount of ten(10)

times(refractive power of left/right eyes). As pushing CLEAR button, the stored

data is to be removed.

[ Figure 42. Measured Result of Refractory ]

Содержание HRK-7000


































































































Результаты поиска

Содержание HRK-7000

Отзывы:

Бренды по названию

Популярные бренды

Huvitz HRK-7000, Руководство пользователя

Результаты поиска

Содержание HRK-7000

Отзывы:

Бренды по названию

Популярные бренды