Huvema HU 300 HAC-4 Topline, Инструкция по эксплуатации

Страница: 46 / 86

45
thickness
This must be performed when the tape thickness of 0.9 mm or deviates the
tape, after long use, by the hard metal plates no longer is performed properly.
This can be checked most easily as follows:
Take a straight piece of band saw blade with blunt teeth in the Introduce guide
shoes and repeatedly slide back and forth to the
To assess the extent game.
Depending on the result, proceed as follows: The set screw (1) screw
something to
to give the band saw more game (or put to the game reduce).
Make sure that the game is not too big (max. 0.02 or 0.03 mm), and check
whether the two screws (2) of the carbide plate are still solid; optionally again
attract. The lateral inserts are mechanically fastened and can, without the
Remove guide shoes of the machine are replaced individually by both
Screws (2) are completely removed. Upon removal of the two lateral Inserts,
the top special operations (4), which leads the saw band shoes, be removed.