Huvema HU 300 HAC-4 Topline, Инструкция по эксплуатации

Страница: 34 / 86

33
the manufacturer
Setting allows the correct direction of rotation of all motors when the
Wires in the order in L1 = R, L2 = S, L3 = T are connected. in
any case, this has to be checked in the following manner (cover tape well closed):
Check the correct direction of rotation
a) When the emergency stop is pressed off button, ¼ turn in the direction of the on
the Button is displayed turn.
b) Turn the black main switch to ON and the controller switches a.
c) the white warning lights should light up after about 5 seconds
d) press the yellow button (hydraulic) on the control panel and the
Hydraulic motor turns on.
1 Manometer
2 Sight glass oil Stan
3 Controller saw frame
e) Check them that the pressure gauge (1) on the hydraulic unit at least
Displays a bar and lift the saw frame / lower the front panel, saw frame