Huvema HU 300 HAC-4 Topline, Инструкция по эксплуатации

Страница: 27 / 86

26
cutting from the band saw blade and / or in saw blade stuck.
17-If the saw blade gets stuck in the cut, the operation of the emergency
stop switch, to acknowledge it and then the cutting unit in the upper Reset
position (via the START CUT). If this is not possible to open the vise and
remove the work piece. Check band saw blade or teeth are damaged. In
this case, the belt must be replaced be
18.-Do not change the working conditions during sawing, unless specifically
indicated (eg speed change with inverter
19 - During the cutting operation, the machine must not be changed or an
unstable situation be brought.
20 - When operating the machine use ear protectors (ear protection, etc.).
WORK WITH CAUTION ALWAYS AND REASON AND YOU HAVE
NEVER UNNECESSARY RISKS FROM!
In some parts of the machine pictograms are mounted on the
Point security measures that people who works on the machine comply
needs. Their meaning (which is easy to understand in any case) is in the
following table specified.
10.2 safety for the operator
In this section, the protective devices are listed, which at the
Sawing machine according to the relevant current safety standards were