Husqvarna Quilt Designer II, Руководство пользователя

Страница: 64 / 82

Decorative Sewing
64
Programming
With Quilt Designer II you can program stitches and letters into
combinations. Save the programmed combinations in nine permanent
memories. A programmed stitch combination that is saved in one
of the memories is retained in the memory even when the machine is
turned off.
PROG Mode
When programming, the Sewing Advisor is not
active.
is selected by touching “
FUNC
” on the
Touch Screen
PROG Menu
Memories
Use the and buttons to select memory. The M
and the number that follows indicates the
active memory. There are nine different memories
(M1 to M9). Each of the nine memories holds up to
62 stitches, which means that you can pro gram and
save up to 558 stitches and/or letters.
When activating , the last used memory is
active. To save your programmed combination in
a mem o ry other than the active, select the memory
number fi rst, before programming any stitches. The
programmed combination will be saved automatically
in the active memory.
Moving the Cursor
The cursor on the Touch Screen is under the active
programming space. Use the arrows to move the
cursor sideways. The number between the arrows
indicate under which stitch, in the sequence the
cursor is positioned.
Deleting Stitches or Program
If there already is a stitch or letter combination
in the selected memory that is displayed in the
programming area, touch
to clear
the memory. To reload a deleted program, touch
again before you enter new stitches.
Memory Tab
Use to bring back the
programming functions when you have made
adjustments in
or changed the settings in
.
Note:
Both the stop- and fi x functions can be
programmed. The stop function is programmed when
you want to sew only one sequence of your program.
The fi x function can be used if you want to fi x at the
end or in the begining of a stitch within the programmed
combination.