Husqvarna Quilt Designer II, Руководство пользователя

Страница: 24 / 82

Learn your Quilt Designer II
24
Pop-up Menus
Quilt Designer II features a number of Pop-up menus
that ap pear on the Touch Screen to indicate what to
do when Quilt Designer II stops or is not sewing.
For example, the Pop-up men us in form you when
the top thread has bro ken, or if the bobbin is empty.
Be low, the most frequent Pop-up men us are list ed
and ex plained.
Top Thread Break
Your Quilt Designer II stops automatically if the top
thread runs out or breaks. Rethread the top thread,
touch
and continue to sew.
Empty Bobbin
Your Quilt Designer II stops automatically when the
bob bin thread is almost empty. Replace the emp ty
bobbin with a full one, touch
and
con tin ue to sew.
Twin Needle
When the twin needle safety button is set, the
width of the stitches is limited. If you select a stitch
that is too wide, the twin needle Pop-up appears.
The stitch width of the selected stitch is adjusted
automatically to fi t the twin needle setting.
The twin needle Pop-up also appears if the twin
needle safety button is set when the machine is
turned on.
Open and touch the sin gle nee dle icon to
cancel the twin needle safe ty.
Sensor Q Foot
The Sensor Q Foot Pop-up appears if the Sensor
Q Foot func tion is activated in
when the
machine is turned on.
No d-Card Inserted
Quilt Designer II alerts you if you try to select a
stitch from the d-Card area on the Touch Screen and
no d-Card is inserted.
Invalid d-Card
Quilt Designer II alerts you if the memory chip at
the backside of the d-Card is not properly connected
to the d-Card connector. Eject the d-Card, wipe it
off with a cloth and insert it again. If the Pop-up
still appears, the memory chip could be damaged
(contact your dealer for further advice).
Note:
It is possible to continue sewing until all
thread on the bobbin has run out.