Husqvarna Quilt Designer II, Руководство пользователя

Страница: 8 / 82

Learn your Quilt Designer II
8
b
a
Spool Pins
Your Quilt Designer II has two spool pins, a main
spool pin and an auxiliary spool pin. The spool pins
are suitable for all types of thread. Place the thread
spool on the spool pin so that the thread reels
coun ter-clock wise.
Main Spool Pin
The main spool pin is ad just a ble and can be used
in a hor i zon tal po si tion (the thread reels off the
sta tion ary spool) or in a vertical po si tion (the
thread spool rotates). There are two spool holders
on the spool pin, one large (a) and one small (b).
Depending on what thread spool size or which
spool pin po si tion you are using, the spool hold ers
are used differently. Use the hor i zon tal po si tion for
normal threads and the ver ti cal position for large
spools or threads with special char acte ris tics.
Horizontal Position
When using the pin in horizontal position and with
narrow thread spools, place the large spool holder
(a) under the thread spool. The small hold er (b) is
placed in front of the thread spool.
If you use large thread spools, place the small spool
holder (b) under the thread spool and the large
hold er (a) in front of it.
The fl at side of the spool holder shall be pressed
fi rm ly against the spool. There shall be no space
be tween spool hold er and thread spool.
Vertical Position
To use the spool pin in its vertical position, fold the
spool pin out towards you. Slide on the large spool
holder and place a felt pad un der the thread spool.
This is to pre vent the thread from reel ing off too fast.
Auxiliary Spool Pin
The auxiliary spool pin is used when wind ing a
bob bin from a sec ond spool of thread or for a
sec ond spool when sew ing with a twin needle.
When using the auxiliary spool pin, place the large
spool hold er (a) and a felt pad un der the thread
spool.
Narrow thread spool
Large thread spool
Main spool pin
Auxiliary spool pin
Auxiliary
spool pin