Husqvarna Quilt Designer II, Руководство пользователя

Страница: 39 / 82

Utility Garment Sewing
39
•
•
•
•
Snap on the optional Edge Stitching Foot
or Edge Joining Foot for topstitching with
dif fe rent needle positions. The fl ange guides the
edge of the fabric.
Twenty-fi ve Needle Positions
Your Quilt Designer II has twenty-fi ve different
needle positions for the most accurate seaming and
topstitching ever. When sewing straight stitch or
reinforced straight stitch, the needle positions can
be adjusted in steps. Take advantage of the dif fe rent
needle positions to edge stitch and top- stitch.
Fabric:
Woven medium
Touch:
Woven medium on the Sewing Advisor, and
stitch A
1
02.
Use:
Presser foot A and size 80 needle as
recommended.
Sew:
• Fold fabric in two and put it in position under the
presser foot. If you need to adjust fabric, touch
Pivot
. Step on foot control. The Sensor Foot
lowers automatically.
• Touch . Touch stitch width to move
the needle 12 steps into the left nee dle po si tion =
Stitch A
1
01.
Touch to move needle 24 steps into the 6.0
right needle position = Stitch A
1
03.
Touch stitch width to move needle back to
center position.
Each touch on stitch width ( or ) corresponds to a
0.25 mm adjustment of the needle position.
To sew about 1/4'' (6 mm) from the edge, touch
stitch A
1
03 and adjust the stitch width to 3.5. Snap
on presser foot A and place the edge of the fabric so
that it follows the outside right edge of the foot and
sew.
To get the maximum feeding when edge stitch ing
close to the edge, place the fabric and sew with left
needle position (A
1
01) so that the edge follows the
in si de right edge of the pres ser foot D, or the fi rst
mark of the left edge of the pres ser foot A.
Use presser foot A when sewing light fabrics and
presser foot D for other fabrics.
Presser foot A
Presser foot D
Optional Edge Stitching
Foot
Presser foot A