INSTALLATION
6
Mount the Installation Brackets — Outside Mount
Mount the Installation Brackets
■
Center the headrail over the window opening at the desired height. Use a pencil to lightly
mark each end of the headrail.
➤
Alternatively, measure the width of the headrail and use that width to mark the headrail
end points over the window opening.
■
Mark 2" in from each of the headrail end marks.
➤
If more than two installation brackets are required (see table on page 3), mark the
location of additional bracket(s) spaced evenly between the two end bracket locations.
Mount into wood whenever possible.
Allow a minimum of 18" from the motor side
for the battery wand.
Window Opening
2"
Motor
Side
2"
Headrail End Marks
Space Evenly
Space Evenly
18" Minimum for Battery Wand
