INSTALLATION
7
■
Center the installation brackets or extension brackets on your marks and mark where to drill
the screw holes.
➤
A minimum 1
1
/
8
" flat vertical surface is required for the installation brackets. Extension
brackets require 1
1
/
4
".
➤
The tops of the installation brackets or extension brackets should be at the desired
height. The brackets should be level and aligned.
CAUTION:
The rear of the brackets must be flush against a flat mounting surface. Do not
mount brackets on curved molding.
■
Drill the screw holes using a
3
/
32
" drill bit.
CAUTION:
Use drywall anchors when mounting into drywall.
■
Attach the installation or extension
brackets using the screws provided.
IMPORTANT:
The tops of the
installation brackets or extension
brackets must be level with their
front edges aligned.
IMPORTANT:
If using a battery wand, use a
minimum of one
1
/
2
" and one
1
/
4
" spacer blocks per
installation bracket to provide the clearance required
for the battery wand and battery wand bracket.
1
1
/
8
"
Extension
Bracket
1
1
/
4
"
1
/
2
"
1
/
4
"
Spacer Blocks
