INSTALLATION
14
■
Plug the power cable from the shading into
the extension cable.
■
Plug the other end of the extension cable
into the socket in the battery wand.
Proceed to “Unpack the Wand and Attach to Activation Arm” on page 15.
18V DC Power Supply
Connect the Power Supply
■
Plug the power cable from the shading
into the extension cable.
■
Plug the other end of the extension cable
into the 18V DC power supply.
■
Plug the 18V DC power supply into a
standard outlet.
■
Secure the extension cable using wire
retainers (not supplied). If hiding the
cable behind the shading, make sure
it does not impede the operation of
the shading.
■
Space the wire retainers approximately
15" apart along the extension cable, as
shown.
WARNING:
Keep cords and small
parts out of the reach of children.
They can wrap cords around their
necks and
STRANGLE
.
They can
also put small parts in their
mouths and
CHOKE
.
WARNING:
Electric shock and/or a fire hazard may occur, if not properly installed.
Proceed to “Unpack the Wand and Attach to Activation Arm” on page 15.
Battery Wand Cover
Extension
Cable
Power Cable
from Shading
Power Cable
from Shading
Extension
Cable
18V DC
Power
Supply
15"
Maximum
Wire Retainers
