INSTALLATION
9
Mount the Installation Brackets — End Mount
End mount the headrail when conventional mounting techniques will not work — for example, in
an arched window opening.
■
If you ordered a back cover, attach the back cover
brackets to the installation brackets.
➤
If a satellite battery pack or an 18V DC power
supply is used, first remove the top tab from the
back cover bracket.
➤
Snap the back cover bracket into the metal
installation bracket.
■
Mount extension brackets to each side of the opening at the desired height of the shading.
➤
The mounting surface must be vertical and flat,
not part of an arched curve.
➤
Minimum mounting surface width with a built-in
battery wand is 2
1
/
8
".
➤
Minimum mounting surface width with a satellite
battery pack or DC power supply is 1
1
/
2
".
■
Attach the installation brackets to the extension
brackets using the provided screws and speed nuts.
WARNING:
To end mount shadings into a surface other than a secure wall stud, use
medium to heavy-duty wall anchors (not provided) matched to the wall thickness.
Failure to mount the brackets securely may result in injury or property damage.
■
If using the optional back cover:
Install the cover into the
back cover brackets. If necessary, trim the back cover to the
desired width.
IMPORTANT:
If using a battery wand, do not install the
optional back cover until the battery wand is installed
(see Battery Wand on page 10).
Proceed to “STEP 2 — Mount the Battery Wand and Connect the Power Cable, If Applicable”
on page 10.
Back
Cover
Remove top tab if using a satellite
battery pack or an 18V DC power supply.
Back Cover Bracket
Remove bottom tab if using a
battery wand and no back cover.
Top Tab
Bottom Tab
Back Cover
Slots
Extension
Bracket
1
1
/
2
"
Minimum
Depth
