Proper product installation, in accordance with these instructions, is the responsibility of the installing agent.
If you have any questions concerning these instructions, please call National Customer Service
800.482.1717
.
Assembly Instruction
Telephone 800.482.1717
Fax 812.482.8800
www.NationalOfficeFurniture.com
Part #
3057148
Rev,
-
Printed in U.S.A
© 2014 Kimball International, Inc.
Package Contents
Alloy
Adjustable Height
Single Center
-
Beam
Hardwire
1
With the center beam upside down. Remove both hardwire junction boxes
from the center beam as shown in
Figure A.
Figure A:
2
Remove the four screws securing the U
-
Channel to the center beam as
shown in
Figure B.
3
Have a licensed electrician wire and install the junction boxes on the center
beam in the desired configuration. Re
-
install the U
-
Channel and junction
box / cover in reverse order of steps 1 &2.
Figure B:
Hardware
Qty
M8 x 12 Screw
4
Self Driving Screw
4
Tools Required
5mm Allen Wrench
Screw Driver
#3 Phillips Driver