Change the Autopilot Settings
(Authorized Technicians only)
When the autopilot was configured, the yaw, rudder, counter
rudder, and turn rate were automatically calculated using the
Operating Parameters Wizard (see
Control Head Configuration:
Operating Parameters Wizard
).
WARNING!
The settings in this section will override the
settings created in the Operating Parameters
Wizard. These settings should only be changed by
an authorized technician (CMET or MEI), or
contact our Customer Resource Center for
assistance.
The following instructions demonstrate how to adjust these
settings manually. The settings should be adjusted incrementally.
1.
Press the SET/BRIGHT key.
2.
Turn the Rotary Knob, or press the RIGHT ARROW
key or LEFT ARROW key, to adjust the first menu
option. The setting will be saved automatically. Press
the SET/BRIGHT key to cycle to the next menu option.
•
Saving:
The settings are saved automatically.
•
Descriptions:
The menu options are described on
the following pages.
•
To exit:
Press the STANDBY/POWER key.
49
Manage Settings