12
10
16
11
14
15
17
13
9
2
3
4
5
6
7
8
Heading:
Red line indicates the heading of the vessel on the analog
compass.
Compass: Analog
Operation Mode:
Indicates the current operation mode.
Starboard icon:
This icon will flash to indicate when the control head
requires a tack direction.
Information Display:
SOG (Speed Over Ground) or COG (Course Over
Ground) will be displayed here. See
Control Head Configuration
to
choose the readout setting.
Big Digits:
Displayed information changes with the operation mode. In
Standby or Follow-Up mode, the Heading (HDG) is displayed. In Auto,
Auto-Track, or Nav mode, the Set Course (CRS) is displayed.
Alarm Icons:
Icons will be displayed here to indicate an error or failure
with the autopilot system. See also Alarms Text and the
Alarms
section
of this manual for more information.
Bar Graph Unit Setting:
Displays units of measure related to the
heading, rudder position, or XTE (Cross Track Error)
Bar Graph:
The information displayed here changes with the operation
mode. In Auto mode, Heading is displayed. In Standby or Follow-Up
mode, the Rudder position is displayed. In Auto-Track or Nav mode, the
XTE is displayed.
Heading, Rudder Position, or XTE
indicated on the bar graph.
Alarm Icons:
see #7 above.
Active Sensor:
Displays the active sensor providing the reading for the
display.
Multisensor:
When the “M” is shown on the screen, it indicates that
Multisensor is enabled.
Big Digits Indicators:
Indicates the information displayed by the Big
Digits. Heading (HDG) or Course (CRS) will be displayed on the left,
and Magnetic (M) or True North (T) will be displayed on the right.
Heading
(Digital Readout): True North, Magnetic North
Port Icon:
This icon will flash to indicate when the control head requires
a tack direction.
Alarm Text:
Information will be displayed here to provide an error or
failure with the autopilot system. See also Alarm Icons and the
Alarms
section of this manual for more information.
1
29
Default Display
