manualshive.com logo in svg

Humboldt HM-5470.3F ConMatic IPC, Руководство по эксплуатации продукта

Поделиться
Скачать
Humboldt HM-5470.3F ConMatic IPC Скачать руководство пользователя страница 56

Humboldt Mfg. Co.

875 Tollgate Road

Elgin, Illinois 60123 U.S.A.

U.S.A. Toll Free: 1.800.544.7220 

Voice: 1.708.456.6300

Fax: 1.708.456.0137

Email: [email protected]

Manufacturer’s Rights and Responsibilities 
Software Copyright

COPYRIGHT NOTICE

©2016 HUMBOLDT Mfg. Co. All Rights Reserved. This manual or  

parts thereof may not be reproduced in any form without the  

expressed written permission of HUMBOLDT Mfg. Co.

UNPUBLISHED LICENSED PROPRIETARY WORK  

©2016 HUMBOLDT Mfg. Co.

The programmable, read-only memory, integrated circuit package contained in this 
equipment and covered with a copyright notice label contains proprietary and con-
fidential software, which is the sole property of HUMBOLDT MFG. CO. It is licensed 
for use by the original purchaser of this equipment for a period of 99 years. Transfer 
of the license can be obtained by a request, in writing, from HUMBOLDT MFG. CO. 

With the exception of HUMBOLDT Authorized Service Facilities, you may not copy, 
alter, de-compile, or reverse assemble the software in any fashion except as instruct-
ed in this manual. US copyright laws, trademark laws, and trade secrets protect the 
materials. Any person(s) and /or organizations that attempt or accomplish the above 
violation or knowingly aid or abet the violation by supplying equipment or technol-
ogy will be subject to civil damages and criminal prosecution.With the exception of 
HUMBOLDT Authorized Service Facilities, you may not copy, alter, de-compile, or 
reverse assemble the software in any fashion except as instructed in this manual. U.S. 
copyright laws, trademark laws, and trade secrets protect the materials. 

Any person(s) and /or organizations that attempt or accomplish the above violation 
or knowingly aid or abet the violation by supplying equipment or technology will be 
subject to civil damages and criminal prosecution. 

Содержание HM-5470.3F ConMatic IPC

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды