manualshive.com logo in svg

Humboldt HM-5470.3F ConMatic IPC, Руководство по эксплуатации продукта

Поделиться
Скачать
Humboldt HM-5470.3F ConMatic IPC Скачать руководство пользователя страница 35

35

Calibration of Instrumentation

The HM-5470.3F ConMatic IPC Automated Consolidation Machine 

includes all necessary instrumentation. All instrumentation included 

with this unit has been calibrated and assigned to specific channels 

for use. These channels are marked on the corresponding instrumen-

tation and the correct calibration information will appear in the chan-

nel calibration parameters, once you have installed the instrumenta-

tion to the correct inputs.

DO NOT RECALIBRATE!

How to Perform a Calibration

All instrumentation included with this unit has been calibrated and 

assigned to specific channels for use. Humboldt recommends (and 

standard lab practice dictates) that your HM-5470 should be calibrat-

ed periodically. For most, recalibration is conducted annually, though 

other rules may apply to the frequency of calibration.
To perform a calibration, it will be necessary to either hire a calibra-

tion service to come in and calibrate your machine, or have the nec-

essary calibration equipment to perform this service.
To begin a calibration, it is always a good idea to save the current 

calibration settings. If you have already saved these settings to a USB 

thumb drive or your computer, this step can be skipped.

Export Calibration via USB (4)

Press this button to select calibrations to export via USB. It is a good 

practice to export all your calibrations to a thumb drive. In case of 

a problem this practice allows you to recover your calibration data 

quickly (See pages 9-10 in Quick Start).

4

5

Содержание HM-5470.3F ConMatic IPC

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды