manualshive.com logo in svg

Humboldt HM-5470.3F ConMatic IPC, Руководство по эксплуатации продукта

Поделиться
Скачать
Humboldt HM-5470.3F ConMatic IPC Скачать руководство пользователя страница 27

27

It is highly recommended that you use some type of refrigerant or 

desiccant dryer and regulator in your machine setup. Humboldt 

offers the following items for this purpose.

Refrigeration Dryer, 115V 60Hz 1ph 

HM-4221 

Compressed air quality is often overlooked in many labs. 
Compressed air contains condensate which, when cooled, 
will turn into water, causing extensive damage to both the 
compressed air network and testing equipment. Refrigera-
tion dryers actively remove this condensate to achieve near 
perfectly dry compressed air. The benefits are notable: 
less system downtime, reduced costs and maintenance, 
and improved test equipment life. This refrigeration dryer, 
thanks to its PlusPack heat exchanger and the most com-
pact dimensions on the market, will prove a major asset in 
your lab. Dryer uses a 1/2” NPT-F  pipe size and nominal 
flow is: 10 SCFM, 17 Nm3/hr and 0.3 Nm3/min. based on 
an ambient and inlet temperature of 100°F (38°C) and a 
working pressure of 100 psig (7 bar)

Desiccant Dryer 

HM-4222

Ideal for drying small volumes of air at the point of use. 
Convenient in-line mounting saves space.  ISO Class 
2 dryer. Max. operating pressure is 150 psig. and max 
operating temperature is 125°F. Total capacity is 4400 ft

3

, 

Female NPT inlet/outlet size is 0.25 NPTF,  bowl size is 1.75 
lbs, Height 11 Inches, Width 4.625”, Includes one charge 
of desiccant

Filter/Regulator HM-4223

One-piece, Filter/Regulator, 0-125 psi (0 - 8.6 bar) with 
standard filtration of 5 micron. Height is 9.77 and width 
is 2.36. Bowl material is polycarbonate and includes sight 
glass and pressure gauge.

HM-4221

HM-4222

HM-4223

Air Connection

The inlet air pressure should not exceed 150psi (1000 kpa). Minimum air 

pressure should be set at least 20psi higher than expected operating pres-

sure. For a maximum vertical operating load of 10kN (2000 lb), the pressure 

required would be 95psi.

Содержание HM-5470.3F ConMatic IPC

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды