manualshive.com logo in svg

Humboldt HM-5470.3F ConMatic IPC, Руководство по эксплуатации продукта

Поделиться
Скачать
Humboldt HM-5470.3F ConMatic IPC Скачать руководство пользователя страница 15

QUICK ST

AR

T GUIDE

15

Test Storage Limit (1)

This field allows you to set the number of previously run tests 

to be available on the “Previous Tests” screen. This number 

can be between 10-50.

Recycled Tests (2)

This refers to previously run tests that are not displayed in 

the “Previous Tests” window. These tests are not deleted; 

they are recycled for later use. Select this button to view/ex-

port/delete recycled tests.

Test Templates (3)

Select this button to delete test templates that have been 

created, but are no longer desired.

Save to USB Check Box (4)

Checking this Box saves the results of a test to USB thumb 

drive inserted into the front USB slot on the machine.

Specimen Height (1)

This field allows you to set the specimen height that will be 

used for all testing calculations.

Specimen Diameter (2)

This field allows you to set the specimen diameter that will 

be used for all testing calculations. 

Preferences – Storage Tab

This screen is accessed by clicking on the Storage Tab under 

System Preferences.

1

2

3

4

Содержание HM-5470.3F ConMatic IPC

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды