manualshive.com logo in svg

Humboldt HM-5470.3F ConMatic IPC, Руководство по эксплуатации продукта

Поделиться
Скачать
Humboldt HM-5470.3F ConMatic IPC Скачать руководство пользователя страница 17

QUICK ST

AR

T GUIDE

17

1

2

3

4

 Initial Set Up — Information

Network Settings Screen

The screen above is the Network Settings screen, it provides 

information on your IP information and network status.

DHCP (1)

Check this box to enable/disable the Dynamic Host Configu-

ration Protocol (DHCP). If enabled, your machine will pick up 

IP information from your router. If disabled, you will need to 

manually enter the network information for a static IP, please 

consult your network administrator for this. 

IP Information (2)

This information will be filled in automatically if the DHCP is 

checked, otherwise you will have to manually supply this in-

formation. The IP address must be unique for each machine. 

Local Status (3)

This indicates the status of the local network connection, 

Connected or Disconnected.

Internet Status (4)

This indicates the status of your Internet connection, Con-

nected or Disconnected.

Note:  If you are experiencing issues with any connec-

tions, please contact your IT department for assistance. 

Clicking on this panel provides a view of the current status  

of the machine. 

(1)

Содержание HM-5470.3F ConMatic IPC

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды