manualshive.com logo in svg

Humbaur 3000 Series, Руководство по эксплуатации

Поделиться
Скачать
Humbaur 3000 Series Скачать руководство пользователя страница 84

7

Safety inspection

82

MACHT’S MÖGLICH

Testing, care and maintenance

Trailers must be inspected by a competent / qualified 
specialist for their condition for safe operation as and when 
required, but at least once a year.
This also applies to all components which are used for the 
load securing according to VDI 2700 or / and EN 12642.

All important mechanical components must be inspected 
and maintained at regular intervals for safety reasons. 
These include:

– Axles
– Brakes
– Bolts
– Attachments
– Switch-off and securing mechanisms
– Electrical system / Electro-hydraulic equipment

Note:

– Comply with the accident prevention regulations 

for all maintenance work.

– Comply with the environmental protection 

guidelines.

– Switch off the engine of the towing vehicle prior 

to starting maintenance work.

– Ensure that the electro-hydraulic equipment has 

been switched off.

– Damaged tie-down points may not be repaired 

on any account, but must be exchanged for new 
parts.

– Damaged and non-functioning trailer parts must 

be exchanged for original spare parts of 
Humbaur GmbH.

Note the maintenance regulations in the operating 
instruction manual “Trailers up to 3.5 to / General – 
Part 1”.
Certain maintenance work may only be carried out 
by trained and qualified personnel.
The prescribed maintenance intervals must be 
complied with.

Содержание 3000 Series











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды