Humbaur 3000 Series, Руководство по эксплуатации

Страница: 59 / 106

Using the trailer as a flat-bed
57
MACHT’S MÖGLICH
Load securing / Operating the body
5
Removing the drop side
Fig. 24 Removing the drop side
1 Drop side
2 Drop side hinge
 Hold the drop side (Fig. 24 /1) lengthwise approximately
in the middle.
 Fold the drop side to a horizontal position.
 Carefully pull the drop side out of the drop side hinges
(Fig. 24 /2) in the direction that is now unobstructed.

Put the drop side somewhere where it is safe from
damage.
The drop sides have been released and removed.
Removing the stanchion
Fig. 25 Removing stanchions
1 Stanchion
2 Stanchion pocket

Pull the stanchions (Fig. 25 /1) out of the stanchion
pockets (Fig. 25 /2) .
If the stanchions are stuck:
 Release them by carefully tapping them with a soft-head
hammer.

Store the stanchions safely to prevent damage.
Putting on the stanchion
Fig. 26 Inserting the stanchions
1 Locking lug
2 Stanchion
3 Stanchion pocket
All stanchions must be inserted in order to lock the
drop sides!
 Insert all stanchions (Fig. 26 /2) in the stanchion
brackets (Fig. 26 /3).
- Ensure that the locking lugs
(Fig. 26 /1) point outwards.
If the stanchions cannot be inserted by hand:
 Carefully tap the stanchions with a soft-head hammer
until they go all the way in.
A - 019
1 2
A - 020
1
2
A - 021
1
2
3